Servo Pull Tester with Variable Pull Speed Pull Force Tensile Testing Equipment

• Warranty: 12 Month
• Trademark: Sinrad
• Origin: China
• Model NO.: SR-SP5000

Product Description

Specification
 

Model No.	SR-SP5000
Test function	Tensile force, pressure, fixed force value, positioning shift, elongation, strength (Mpa)
Servo Motor	Panasonic Servo Motor
The test accuracy	Less than 0.3% of the indicated value
display mode	Computer monitor display (including computer), can display curves
Unit switch	Kgf,lbf,N,g,KN,T etc.
Maximum force	5000N(optional 1000N 2000N etc)
Sample frequency	400times/sec
Resolution ratio	1/300000
print function	Can be connected to the office printer printing (printer optional)
Power	220 VAC, 50 Hz,3A
Maximum measuring stroke	800mm(not including fixture)
Displacement display value	0.001mm
displacement accuracy	Less than 0.5% of the indicated value
Test speed	0.001~500 mm/min stepless speed regulation
Breakpoint ratio	0~99%, users can set proper break down time according to different materials
safety device	Up and down stroke limiting device
Overload protection	Over the maximum load, the machine automatic protection
Fixture configuration	Custom fixture according to sample, actual customer test requirements
Computer	window system
Software	Refer to the software version of the computer measurement system
size	70x40x160 cm
Weight	180kgs

Feature
 

This machine adopts computer control and is widely used in the mechanical performance test of rubber, plastic, wire and cable, textiles, waterproof materials, non-woven fabrics and other non-metallic materials and metal wires, metal foils, metal plates and metal rods. It can also be used with special fixtures. It is suitable for all kinds of finished product tensile, compression, peeling, shearing, tearing, bending (folding) tests.

Multiple data can be printed, and graphical output comparisons can be made according to different data, with high control accuracy and easy operation; modular design, complete variety of accessory accessories, and flexible matching.

This machine is mainly suitable for testing the mechanical properties of metal such as tensile, compression, bending, etc. It can also realize multiple dead-cycle tests such as constant stress, constant strain, creep, relaxation, axial, and radial.

 

The tensile strength, yield strength, elongation, constant elongation stress, constant stress elongation, elastic modulus and other parameters can be automatically calculated according to GB, JIS, ASTM, DIN and other standards.

Control software introduction: Software operating system language: English.

Control method: Various control methods such as computer software setting speed, setting load breaking (rupture), running time, etc.

Available test data: Maximum strength, minimum strength, breaking value, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum, minimum, average value of peeling interval, etc. (Customers need to select before ordering) It has multiple protections such as overload, overcurrent, overvoltage, undervoltage, overspeed, and stroke. The data results are derived from the crystal report format currently accepted by the national standard.

Fixture

Company Information

Sinrad Technology Co.,Ltd, specialized in automation machine, customizing and manufacturing cable processing(cutting, striping, twisting, crimping, soldering, winding, etc.) machine, automatic soldering machine, intelligent soldering machine, full automatic usb soldering machine, pulse heating soldering machine,high frequency soldering machine, other soldering machine, laser marking machine, laser engraving machines, laser welding machine, welding equipment, and other production equipment.