Small wire harness heat shrinkable tube middle heating machine
This machine is suitable for all kinds of wire, terminal with heat shrink tube(single wall) shrinking.
| Model |
SR-RS18 |
| Working voltage |
AC220V±10%, 50HZ |
| Heating area length |
<130mm |
| Applicable tube size |
Diameter < 25mm. |
| Temperature |
Fixed, about 180°C |
| Heating method |
Infrared Radiant Tube |
| Heater power |
500W*4 = 2000W |
| Total power of machine |
2300W |
| Heating device dimensions |
400*230*300mm |
| Controller dimensions |
220*200*160mm |
| Remark: It is only for ordinary heat shrink tube. Can not be used for glued heat shrink tube. |
The machine is more suitable for heating heat shrinkable sleeves such as long wire harnesses and terminal wire harnesses. It can work continuously for 24 hours, and the heating time can be set freely. It can realize manual triggering to start heating, or automatic cycle heating start-stop mode operation.
Heating method:
It is heated by approximately half-enclosed annular infrared radiation to increase the uniformity of heating.
Features:
1. Equipment composition: Heating system + control system.
2. Two heating control modes:
1). The product is approached, triggered by induction, and heated.
2). Automatic circulation heating start-stop mode operation.
3. Heat insulation design:
The double design of the heating zone shell keeps the internal and external temperatures isolated, and the surface temperature of the shell is low.
sonia at customizemachine com
Sinrad Technology Co.,Ltd, specialized in automation machine, customizing and manufacturing cable processing(cutting, striping, twisting, crimping, soldering, housing inserting, winding, binding, testing, etc.) machine, automatic soldering machine, intelligent soldering machine, and other production equipment.
Audited Supplier 
){kind=link}