Sr-S400 Terminal Section Analysis System Crimp Cross Section Analyzer

• Customization: Available
• Driven Type: Electric
• Condition: New
• Model NO.: SR-400
• Warranty: 12 Months
• Automatic Grade: Semiautomatic
• Name: Cross-Section Analyzer
• Power: 220V/50Hz5w
• Weight: 30kg
• Dimension: 430*390*300mm
• Cutting Range: 0.01mm²~72mm²
• Atmospheric Pressure: 80kpa~106kpa
• Power Consumption: 180W
• Transport Package: Carton
• Specification: 430*390*300mm
• Trademark: sinrad
• Origin: China

Product Description

Product Description

 SR-S400 Terminal section analysis system  Crimp cross section analyzer

Parameters Name	Parameters Datas
Motor/speed	2800 revolutions/min (adjustable) German brushless motor
Cutting range diameter	0.01mm---8mm
Cutting speed	1.6mm/sec
Cutting wheel inner diameter	inner diameter 32mm
Cutting wheel Outer diameter	150mm
Thickness	0.5mm
Grinding speed	1400 rpm (adjustable)
Grinding disc diameter	150mm
Grinding disc thickness	6mm
Dedicated terminal clamp	1PCS
Power switch	220V/50HZ
Corrosion part Corrosion time	5-30min
Imaging system	1/3″ professional CCD high-definition imaging system(3 million pixels (CCD gigabit network,The card access screen is clear and transmission speed Fast and stable))
Terminal dedicated analysis measurement Software	1PCS
Magnification:	16X~260X continuous zoom
Measurement accuracy	0.004mm
Optical lens	0.7~4.5X (Hong Kong joint venture) Pumisco End stop
High precision standard block	calibration sheet
Terminal measuring range	0.01mm2-50mm2
Lighting source	All white adjustable LED lighting device (cold light)
Warranty period	1 year

Introduction

Terminal cross-section analyzer integrated terminal cutting and grinding table: After the terminals are clamped by a dedicated harness clamp, the cutting disc and the grinding disc are independently controlled, and the speed can be easily controlled. (Because different AWG terminals need different speeds to cut
More perfect cutting, but the grinding process should use the corresponding speed according to the size of the terminal. Our all-in-one machine is independently controlled by dual-control frequency conversion technology, with a speed range of 0~4500 rpm, using German dual motors). Cutting speed is required. In addition, when grinding and polishing the terminal section, it is necessary to control the speed according to the material and size of the terminal. . During grinding and polishing, a rail structure with scales is designed that can be fine-tuned up and down, which can accurately control the height of the terminals for customers. The time required for terminal cutting, grinding and polishing is 2 to 3 minutes. Very fine lines exceeding AWG38 can be displayed clearly. Use newly developed cross-section assessment
It can measure CH and CW and calculate the cross-sectional area instantly. The measurement accuracy at the maximum magnification is 3µm.
It only takes 2 minutes to complete the sample making process for wire harness terminal inspection!!

Feature

The terminal cross section analyzer is a precision testing and analysis equipment for the quality inspection of the wiring harness industry.
The analyzer system consists of an integrated terminal cutting and grinding equipment, optical sampling imported from Japan, corrosion cleaning, and cross-sectional image acquisition system., wiring harness terminal picture measurement and analysis system, using cutting and grinding integrated equipment, the latest patented technology, cutting
The grinding is completed at one time, which fully guarantees the flatness requirements of the terminal. The cutting and grinding split machine equipment originally used by our company has been Update (after cutting, remove the jig and place it on the grinding equipment for grinding, but it does not guarantee the flatness of the terminal and cannot be accurately determined
The precision of grinding). The complete detection system can complete the processing and analysis of a terminal within 5 minutes, which greatly improves the terminal
Speed of sub-section quality inspection. The operation is simple, convenient and fast, adopting Japanese high-definition image acquisition system, accurate Measurement and analysis escort your production.

 

  FAQ

 

1 Price terms

The price is based on EWX/FOB, if you request CFR or CIF, please give us your delivery port, and we will give you CFR price or CIF price for reference.

 

2 Can I send samples to check the machine quality.

Yes, welcome to send us samples. We would be pleased to show you trial testing base on your samples.

 

3 How to learn the machine?

1) Offer free technology learning support in our factory

2) Provide detail user manual with detail video illustration

3) Support engineer service at site if clients asking for

 

4 How about the lead time and delivery time of order?

Standard model, can be ship out within 3~5days after confirmed order and deposit.

Customized model, normally lead time is 10~20 days, after confirmed all order detail deposit and got samples.

Company Information

Sinrad Technology Co., Ltd is an international high Tech company specializing in R&D, production and sales automation machine. We mainly engaged in R&D and sales on intelligent production lines and non-standard automation equipment which we can provide professional solution for your production line. 

We mostly focus on wire harness processing machine, (cutting, striping, twisting, crimping, housing inserting, soldering, testing machine), intelligent soldering robot, welding machine and so on. Sinrad Tech has developed 3 factory for automation soldering machine, cable automotive machine and laser welding machine. We have committed to creating the first brand of automation robot in China. 

In the future, Sinrad Technology will deeply in develop more multi-automatic machine & automation robot for striving as outstanding enterprises in the automation field.

Certificate