Wiring harness middle heat shrinkable sleeve shrinking machine
Mainly suitable for heating heat shrink tubes, it can adopt a variety of control methods, and the heating time and stop time can be freely adjusted according to actual needs. It can realize manual triggering to start heating, or automatic cycle heating start and stop mode.
This machine is suitable for heating and shrinking heat shrinkable tubes in wire harness processing companies. The operating time, working time, and heating zone width can be adjusted arbitrarily according to the production process requirements. Can work continuously 24 hours a day.
| Model |
SR-RS1826 |
| Working voltage |
AC220V±10%, 50HZ |
| Heating area length |
<180mm adjustable |
| Heating area width |
<260mm |
| Applicable tube size |
Diameter < 10mm. |
| Temperature |
Max 260°C adjustable |
| Heating method |
Infrared radiant tube |
| Heater power |
300W*12 = 3600W |
| Total power of machine |
4000W |
| Heating device dimensions |
470*550*390mm |
| Controller dimensions |
220*350*400mm |
| Packing |
80*65*60CM, 60KG |
Heating method:
1) Constant temperature mode: After pressing the "Start" button, the heating tube lights up and starts working. After pressing the "Stop" button, the heating tube stops working.
2) Timing mode: Set the thermostat to above 200°C, select the appropriate timer mode, and then step on the foot switch. The heating tube will light up and start working, and the timer will start counting. After the set time is reached, the heating tube will stop. Work.
sonia at customizemachine com
Sinrad Technology Co.,Ltd, specialized in automation machine, customizing and manufacturing cable processing(cutting, striping, twisting, crimping, soldering, housing inserting, winding, binding, testing, etc.) machine, automatic soldering machine, intelligent soldering machine, and other production equipment.
Audited Supplier 
){kind=link}