Automatic Wire Terminal Cross Section Analyser Analysis System

Product Description

Cross section analyser with computer 

Terminal cross-section analyzer integrated terminal cutting and grinding table: After the terminals are clamped by a dedicated harness clamp, the cutting disc and the grinding disc are independently controlled, and the speed can be easily controlled. (Because different AWG terminals need different speeds to cut
More perfect cutting, but the grinding process should use the corresponding speed according to the size of the terminal. Our all-in-one machine is independently controlled by dual-control frequency conversion technology, with a speed range of 0~4500 rpm, using German dual motors). Cutting speed is required. In addition, when grinding and polishing the terminal section, it is necessary to control the speed according to the material and size of the terminal. . During grinding and polishing, a rail structure with scales is designed that can be fine-tuned up and down, which can accurately control the height of the terminals for customers. The time required for terminal cutting, grinding and polishing is 2 to 3 minutes. Very fine lines exceeding AWG38 can be displayed clearly. Use newly developed cross-section assessment
It can measure CH and CW and calculate the cross-sectional area instantly. The measurement accuracy at the maximum magnification is 3µm.
It only takes 2 minutes to complete the sample making process for wire harness terminal inspection!!

Software funtion
Compression ratio, number of harnesses, crimp height, crimp width, cross-sectional area, support height, support angle, burr width, burr height, etc.

 

Specification:

  

Parameters Name	Parameters Datas
Motor speed (cut/grind)	2800RPM/1400 RPM
Cutting range diameter	Ø 0.10mm - Ø 24.00mm
Cutting speed	2800RPM
Cutting wheel diameter	φ110 x 0.5 xφ20mm
Etched part	Professional Terminal Section Cleaning Fluid
Corrosion Time	5 to 30 sec
Grinding speed	1400 rpm (adjustable)
Grinding disc diameter	100mm 1000# 2000# can select
Dedicated terminal clamp	1PCS
Power switch	220V/50HZ
Corrosion part Corrosion time	5-30sec
Imaging system	1/3″ professional CCD high-definition imaging system(5 million pixels (CCD gigabit network,The card access screen is clear and transmission speed Fast and stable))
Terminal dedicated analysis measurement Software	1PCS
Magnification:	36X~230X continuous zoom (support digital to 500X)
Measurement accuracy	0.01-50sqmm
Optical lens	0.7~4.5X (Hong Kong joint venture) Pumisco End stop
Software version	version V3.2, enhanced measurement tools including compression ratio, etc.
Lighting source	All white adjustable LED lighting device (cold light)
Warranty period	1 year

 

Features:

1. Use linear guide rails to ensure installation accuracy.
2. The motor is installed horizontally to ensure that the rotation deflection is small.
3. Laser infrared alignment ensures fast alignment of the cutting position.
4. Optional movable XY working platform with 360-degree rotating table, convenient for terminal cross-section sampling.
5. Increase the drainage system to facilitate cleaning of the machine.
6. The fixture is in front for easy installation and adjustment.
7. Trigger switch to ensure personnel safety.
8. Velcro sandpaper, quick replacement.
9. Using a 5-megapixel industrial camera, it can capture high-definition pictures dynamically.
10. Built-in analysis software for measurement standards, export reports quickly and quickly.
11. Using seven-inch touch system, intelligent cutting program
12. Up to 30 groups of programs can be saved
13. Increase key operation, prolong service life.

Pictures:

Semi-automatic Machine:


Automatic machine: 



Testing:




Widely use:



Accessories:



 

Contact:

 
 

FAQ:

1 Price terms

The price is based on EWX/FOB, if you request CFR or CIF, please give us your delivery port, and we will give you CFR price or CIF price for reference.

2 Can I send samples to check the machine quality.

Yes, welcome to send us samples. We would be pleased to show you trial testing base on your samples.

3 How to learn the machine?

1) Offer free technology learning support in our factory

2) Provide detail user manual with detail video illustration

3) Support engineer service at site if clients asking for

4 How about the lead time and delivery time of order?

Standard model, can be ship out within 3~7days after confirmed order and deposit.

Customized model, normally lead time is 10~30 days, after confirmed all order detail deposit and got samples.

Company info:

Sinrad Technology Co.,Ltd, specialized in automation machine, customizing and manufacturing cable processing(cutting, striping, twisting, crimping, soldering, housing inserting, winding, binding, testing, etc.) machine, automatic soldering machine, intelligent soldering machine, and other production equipment.