Specification
| item |
value |
| Place of Origin |
China |
| Brand Name |
sinrad |
| Model Number |
SR-P001 |
| Usage |
Cable Cutting and Stripping |
| Name |
Precision pneumatic stripping machine |
| Function |
Stripping Wire Insulation |
| Wire range |
AWG14-32
Loose wire, solid core wire, single stranded wire, single core cable, wire, cable, rubber wire
|
| Power |
pneumatic(0.55Mpa-0.8Mpa) |
| Cutting length |
20mm |
| process time |
0.3s |
| Warranty |
1 Year |
| Weight |
2.4 |
| Dimension |
265 x 70 x 135 mm |
| Keywords |
pneumatic peeling machine |
| Feature |
Higher Precision |
1.Working condition
The working pressure shall not be less than 0.5Mpa,the pneumatic induction type triggers the start, the tangent range is 0.3~2.03 square (soft wire skin can reach 4 square, the air pressure must be greater than 0.6Mpa), the adjustment method is knob, The length is adjustable from 1.5-20mm, the wire diameter is adjustable from 0.3-2.03, and the length of the half-stripped glue is adjustable. The main features of the machine are high precision, high efficiency and fast payback period.
2. Equipment adjust
Button 1: skinning length adjustment knob, only allow counterclockwise rotation.
Button 2: adjust half stripping or full stripping
Button 3: pneumatic switch
Button 4: adjust the depth of the peeling knife
Button 5: adjust the center of the skinning wire and the blade, (it is generally necessary to adjust this knob for diagonal opening or replacing the wire diameter)
Button 6: adjust the tension of the grip line (skid, paw print is too deep generally by adjusting this knob)
3.Maintenance of equipment
(1) If the machine does not work, please turn off the air source.
(2) Add appropriate amount of lubricating oil to the relative moving working face such as guide rail each shift.
(3) Air source please install triplet, and add lubricating oil.
(4) Often clean the machine residual rubber and copper wire and other sundries.
4. Blade installation and standards
Step 1: Close the air supply
Step 2: Turn knob 4 to scale 0
Step 3: Push knob 6 inward to the bottom, requiring the blade to coincide (note that the blade is front the back overlap is not to the top) and the knife edge is required to maintain a regular quadrilateral during the overlap process.
5. Installation of wire grasping jaws
When the knife edge is installed to coincide with the installation of the wire claw, it is required that the two claws can be symmetrical to the center of the knife edge, otherwise there will be a diagonal or stripping head bending to a single side, the size of the middle gap according to the customer line automatically adjust. (generally thin line gap is small, most of the line is thin; Thick skin and large gap, this case is applicable to non - marked line, line skin is very thick and the core is very thin)
6. Common problems and solutions
(1) The cord's stuck,the skinning's stuck,the machine's stuck.
Turn off air source (button 3) and pull back knob 6, or air Low pressure.
(2) Turn knob 4 to 0 or smaller and it still won't peel.
Check the blade edges according to the blade installation standards.
(3) The accuracy grade of peeling length decreases during long-term use
Lock the brake pad nut (this situation can only be encountered in old machines or high frequency of use, other situations with caution)
Sinrad Technology Co., Ltd
sinrad.en.made-in-china.com
sinrad.en.made-in-china.com
E-mail:filix@customizemachine
1 Price terms
The price is based on EWX/FOB, if you request CFR or CIF, please give us your delivery port, and we will give you CFR price or CIF price for reference.
2 Can I send samples to check the machine quality.
Yes, welcome to send us samples. We would be pleased to show you trial testing base on your samples.
3 How to learn the machine?
1) Offer free technology learning support in our factory
2) Provide detail user manual with detail video illustration
3) Support engineer service at site if clients asking for
4 How about the lead time and delivery time of order?
Standard model, can be ship out within 3~7days after confirmed order and deposit.
Customized model, normally lead time is 10~30 days, after confirmed all order detail deposit and got samples.
Sinrad Technology Co.,Ltd, specialized in automation machine, customizing and manufacturing cable processing(cutting, striping, twisting, crimping, soldering, housing inserting, winding, binding, testing, etc.) machine, automatic soldering machine, intelligent soldering machine, and other production equipment.
Audited Supplier 
){kind=link}