Portable Pneumatic Wire Crimping Tool Terminal Crimping Machine for Close Terminal 6-120mm2 with Cheap Price

• Customization: Available
• Model: Sr-120L
• Air Pressure Needed: 0.3-0.8MPa
• Crimping Force: 6.8 T
• Weight: 14kg
• Crimping Shape: Base on Terminal
• Crimping Speed: 1.5s
• Machine Size: 39X18X23cm
• Accessories: Air Pipe, Foot Switch, Crimping Die
• Transport Package: Wooden Case
• Trademark: sinrad
• Origin: China
• Production Capacity: 600PCS/Hour
• Package Size: 0.00cm * 0.00cm * 0.00cm
• Package Gross Weight: 0.000kg

Product Description

Product Description

SR-120L Pneumatic Terminal Crimping Machine

This machine can replace manual crimping tools. You can break free from the tedious, repetitive manual crimping routine with this pneumatic crimping machine. Its crimping speed is far higher than manual operations, bringing significant cost advantages. It's suitable for crimping international - standard terminal connections. The precision die sets are crafted from high - quality alloy steel via a special heat - treatment process, featuring fast die replacement, rapid crimping, and a reliably firm crimp result.

The crimping dies of this machine are interchangeable. There's a wide variety of crimping die sets available for selection. We can also customize die sets for special - shaped terminals to meet your unique processing needs.

Product introduction

This product uses the double-acting standard cylinder driving, has the high efficiency and high quality advantages on the crimping force and crimping speed. It is applicable for crimping large quantities of terminals. If the diversified forms of crimping terminals are used. Our company have many kinds of crimping die sets for selection.

Feature

(1)The mini design has a small footprint and is easy to move.

(2)Foot switch control, fast and convenient operation.

(3)High efficiency and energy saving.

(4)With positioning piece, more safe operation.

(5)No need to replace crimping die to crimping different size of terminals.

Specification

Item	Data
Air pressure needed	0.3-0.8MPa
Crimping force	6.8 T
Weight	14kg
Crimping shape	base on terminal
Crimping speed	1.5s
machine size	39*18*23cm
Accessories	Air pipe, foot switch, crimping die

SR-120L is the first crimping machine in the world for crimping the non-insulated terminal of 6-120mm 2 with the air source. The machine can provide extremely convenient and quick service for the user to greatly promote the practical value and convenient use of the tools. The parts of the crimping machine are made of the special alloy steels by many precision stamping after heat treatment, the sections are smooth and flattened. The crimping die sets are made of super hard tool steel with the advantages of long life, accurate aperture size and good crimping effect. The terminal mode can be hexagonal type or point type after crimping with different crimping die sets. Each crimping machine shall be equipped with 1 set of crimping dies, the customers can select different crimping die sets according to different requirement.

Using method

Please connect to the air tube in accordance with the corresponding markings of the equipment and accessories.
- Open the air source, the crimping can be conducted only after the clamp head of the equipment in open state. 
- After the crimping die sets is installed, slowly step on the foot air valve so that the machine can operate at low speed, to check the installation situation of the crimping die sets. 
- Place the terminal in the corresponding die sets, step on the foot air valve, release the air valve after the completion of the crimping.
- The crimping speed can be manually controlled according to the speed when stepping on the air valve, or adjusted by selecting the matched pipe joint with the throttling valve.

Packing & Delivery

- The crimping die sets are used in pairs, when installing, please confirm that the upper and lower die sets are in the centered positions. 
- After installing the die sets, slowly step on the foot air valve, so that the machine can operate at low speed, to check the installation situation of the crimping die sets.

After Sales Service

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 36 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

Company Profile

FAQ

Q: What’s the lead time for orders?
A: Standard models ship in 15–30 days; customized units require 30–45 days.

Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.

Q: Can I request a customized bucket size?
A: Absolutely! We offer tailored attachments.

Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).

Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.